Yesterday I went out and bought a pair of fake "vampire ears", as they're so not properly called, for... whatever cosplay that I'll get to do, which demands these sorts of prosthetics
I've always hated the look of these, when you bought them, never do they look even slightly realistic.
So had to do a very not so exciting make-up job, on both ears. Starting out with covering with my everyday concealer, since... well I'm not yellow, as some of you might have noticed, and then added shadows with different brown eyeshadow and edges with some black.
Still not completely satisfied with the out-come, but I'm in no dire need to use them.
Today I picked up my Mehron Rigid Collodion, a scarring fluid, at the post office
I've been sooo very excited to get this and try it out, and I must say, I'm VERY satisfied with this product.
You can buy a brush, yourself, if you want to do finer lines, but the brush that comes with works fine for me. (It's the same as a nail polish brush)
This is the result of apx. three appliances, to get a deeper effect of the scar, the fluid dries very quickly, so it doesn't take forever to apply several layers.
The only downside to it, that if it's in a spot where your skin moves a lot, it will start to come off around the edges, but that's pretty obvious.
To remove the dried up "scar", you really just "rip" it off, apply lukewarm water if you're a whiny little fairy like myself.
Thursday, October 6, 2011
Saturday, October 1, 2011
SDotP: Customizing a wig and torso armor
Thursday the wigs finally arrived, and of course.. the wig-craze that I am, I had to start styling it up as fast as possible.
The blue wig I had gotten, is long by itself, but not long enough to have the ponytail that Kaito has as the demon, alas; sewing on extensions.
The wig itself is heat resistant, and the extensions I got wasn't, so I was very lucky that the color matched up as well as it did. I got myself five single-strands of clip-on extensions, removed the clip and have sown them on were I thought would look the best in layering.
Since I'll removed them again at some point, I used black thread, so it'd be easier to spot.
Today, I helped my lovely cosplay partner, with her torso armor.
Since she wanted something body tight, that would fit properly, we had to make it directly on her body, and so we wrapped her like a turkey (her words), and got cooking /see what I did there? 8D
We only added one layer of paper-maché, since it'll also be covered with chicken wire, and other very fun stuff, so it'll be sturdy for the stage.

As I've already said on this dA Journal, I've started scripting a few CMV's, and right now I'm working on a major one, with Ao No Exorcist, I've written down a few scenes that'd I'd like to use, but that it thus far, needs more time.

The blue wig I had gotten, is long by itself, but not long enough to have the ponytail that Kaito has as the demon, alas; sewing on extensions.
The wig itself is heat resistant, and the extensions I got wasn't, so I was very lucky that the color matched up as well as it did. I got myself five single-strands of clip-on extensions, removed the clip and have sown them on were I thought would look the best in layering.
Since I'll removed them again at some point, I used black thread, so it'd be easier to spot.
The wig, inside out on a Styrofoam head, so it's easier to work with.
Today, I helped my lovely cosplay partner, with her torso armor.
Since she wanted something body tight, that would fit properly, we had to make it directly on her body, and so we wrapped her like a turkey (her words), and got cooking /see what I did there? 8D
We only added one layer of paper-maché, since it'll also be covered with chicken wire, and other very fun stuff, so it'll be sturdy for the stage.

As I've already said on this dA Journal, I've started scripting a few CMV's, and right now I'm working on a major one, with Ao No Exorcist, I've written down a few scenes that'd I'd like to use, but that it thus far, needs more time.

Frickin' artistic picture, because you're not allowed to know what'll happen 8D
Monday, September 19, 2011
Adeste Fideles
*Be present, faithful ones
Since I wasn't completely satisfied with the first shoot I had in my Kiris cosplay, I dragged mustacheranger out for a quick shoot.
Didn't get much out of this one either /I really need my Raenef, haha.
But I still got some solo shots, which I think are pretty neat, so just because I can, I'm sharing them here.
I've edited to look more cartoon-esque, just for the blog. Enjoy.
*As always, click to see larger version
Since I wasn't completely satisfied with the first shoot I had in my Kiris cosplay, I dragged mustacheranger out for a quick shoot.
Didn't get much out of this one either /I really need my Raenef, haha.
But I still got some solo shots, which I think are pretty neat, so just because I can, I'm sharing them here.
I've edited to look more cartoon-esque, just for the blog. Enjoy.
*As always, click to see larger version
Sunday, September 18, 2011
SDotP: Layers and Chrest
This weekend have been dedicated fully to the start-off on Kaito.
My very lovely cosplaypartner, Kiba, arrived friday, to help and be my sparing partner in this, I must measure up!
I started out, running by the patterns I'd chosen for the different parts, and then started cutting up, some of the fabric. The pants got tossed to the side, since I don't really need any sudden help with them (for now).
The shirt/jacket itself, actually have five different kinds of fabrics all together, but it's not something you'll be able to tell, unless you're wearing it. The outer layer is the exact same fabric all over, the see-through bottom you can see in the picture below, and oh god, it looks so nice, you won't even believe it!
Front piece is lined with red, as you can see below and above to the bottom-right, which I find a lovely contrast to everything the costume will have going on. Nom.
If you know me on facebook, you might have seen me ranting, about me and the chrest that I had to redo, and since I could, I did that tonight. I also altered it slightly, since this would be a neater version, when parted down the middle.
The chrest I'm using for Kaito is the Khanda symbol, of Sikhism, representing "The Coat of Arms" ; truth, willingness to fight, and one God, never beginning, never ending. How this translate into the story we're going to perform, I'll let you think about.
My very lovely cosplaypartner, Kiba, arrived friday, to help and be my sparing partner in this, I must measure up!
I started out, running by the patterns I'd chosen for the different parts, and then started cutting up, some of the fabric. The pants got tossed to the side, since I don't really need any sudden help with them (for now).
The shirt/jacket itself, actually have five different kinds of fabrics all together, but it's not something you'll be able to tell, unless you're wearing it. The outer layer is the exact same fabric all over, the see-through bottom you can see in the picture below, and oh god, it looks so nice, you won't even believe it!
Front piece is lined with red, as you can see below and above to the bottom-right, which I find a lovely contrast to everything the costume will have going on. Nom.
If you know me on facebook, you might have seen me ranting, about me and the chrest that I had to redo, and since I could, I did that tonight. I also altered it slightly, since this would be a neater version, when parted down the middle.
The chrest I'm using for Kaito is the Khanda symbol, of Sikhism, representing "The Coat of Arms" ; truth, willingness to fight, and one God, never beginning, never ending. How this translate into the story we're going to perform, I'll let you think about.
Sunday, September 11, 2011
Sheryl Nome: Shading a wig.
I've just finished shading my Sheryl wig, since the wig I got, I felt didn't really relate to Sheryl's hair, as much as I wanted it to. So I got cracking with the markers, which I borrowed from my lovely room-mate Nadia.
Putting streaks and shades into a wig, is really the easiest thing in the world, though very time-consuming.
If it's your first time, shading a wig, you should use a tone slightly darker than the wig's actual color, just to test it out, by doing some vertical stripes on a layer that isn't too visible.
Once you get a good technique working for you, continue with the rest of the wig, with the actual color you need. Though it's always a good idea to go lighter at first, and then layer the color if you must.
When I finished putting in the pink shades into the blonde part of the wig, I moved on to the solid pink, which looked fine underneath the shades blonde, but I wanted a more real look to it, so I used a marker, a few degrees darker than the actual color, and put in very few, very thin and separated streaks.
At last, remember... when using markers and other sorts of pens, which is used for paper... Know that the color most likely won't stick in water (some will though).
You are, in actuality, drawing on plastic, which most inks (unless designed for it), don't stick on.
Markers will stick better to a heat-resistant wig, because of the different texture, but I do not recommend doing shading, the night before the con.
Putting streaks and shades into a wig, is really the easiest thing in the world, though very time-consuming.
If it's your first time, shading a wig, you should use a tone slightly darker than the wig's actual color, just to test it out, by doing some vertical stripes on a layer that isn't too visible.
Once you get a good technique working for you, continue with the rest of the wig, with the actual color you need. Though it's always a good idea to go lighter at first, and then layer the color if you must.
When I finished putting in the pink shades into the blonde part of the wig, I moved on to the solid pink, which looked fine underneath the shades blonde, but I wanted a more real look to it, so I used a marker, a few degrees darker than the actual color, and put in very few, very thin and separated streaks.
At last, remember... when using markers and other sorts of pens, which is used for paper... Know that the color most likely won't stick in water (some will though).
You are, in actuality, drawing on plastic, which most inks (unless designed for it), don't stick on.
Markers will stick better to a heat-resistant wig, because of the different texture, but I do not recommend doing shading, the night before the con.
Subscribe to:
Posts (Atom)







